0036 1 406 98 08
SKU
K1-1
K1-1 Infrared sensor exit button with INOX shield, with NO/NC outputs
€12.10
Description
K1-1 Infrared sensor exit button with INOX shield, with NO/NC outputs
Infrared sensor exit buttons with their above-average technological prowess, elegant and modern appearance can be used almost anywhere. No need to use a proximity switch, the infrared sensor detects the approaching hand and switches the output.
The K1-1 is a infrared sensor exit button with an aesthetic stainless steel shield, "NO TOUCH" above the switch and "EXIT" below it. There is a ring LED around the button which changes from blue to green when the button is turned.Can be used in access control systems to open/close doors with electric locks.
Downloads
More Information
| Voltage (V) | 12 - 24 V |
|---|---|
| Voltage type | DC |
| Stand-by current consumption (A) | 20 mA |
| Maximum current consumtion (A) | 35 mA |
| Operating mode/Type of device | Infrared Touchless Sensor Button |
| Switch type | Relay |
| Type of switching | NO/NC |
| Number of switches | 1 |
| Controlled output current rating | 3A @ 30V DC |
| LED type | Two colours |
| LED colour | Blue/green |
| Detection adjustable | Yes |
| Detection distance | 5 - >20 cm |
| Controlled output timable | No |
| Tamper protection | none |
| Dimension of faceplate | 115 x 70 mm |
| Mortise dimension | 55 x 43 x 16 mm |
|---|---|
| Environmental temperature | -20°C - +55°C |
| Humidity tolerance (non-condensing) | max. 95% |
| IP rating | IP54 on the switch surface |
| IK rating | None |
| Mounting | flush mounted |
| Installation area | indoor, outdoor (rain-protected) |
| Housing material | metal and plastic ABS |
| Material | Plastic and metal |
| Dimensions | 115 x 70 x 24 mm |
| Gross weight | 115 gr |
| Package contents | screw set, switch |
| Other features | EBOX-2, MBB-811D-M |
| Manufacturer | SecuKey |
| Warranty | 12 months |
| Certificates | CE |
| Product category | A |