0036 1 406 98 08
SKU
E1-EM
Drip-proof (IP66) flush mounted standalone card reader - EM
€36.30
Description
E1-EM - Drip-proof (IP66) flush mounted standalone card reader - EM
Standalone card readers are high-security devices suitable for controlling almost any access point. Their installation and use are extremely simple.
The E1-EM is a compact, standalone card reader for outdoor use. Ideal for locations where a more complex, higher-security access control system is not required. While it doesn't offer many configuration options, the settings it does have are much easier to adjust compared to our other devices. No remote control or programming menu is needed; the device is configured by shorting the unlock button input, cycling the power on and off, while listening to the audio signals. Users can be added using a master card.
The package includes the reader, a master card, screws, wall plugs, and adhesive for installation, as well as a diode for connecting the lock.
Downloads
More Information
| Product category | A |
|---|---|
| Type of device | RFID reader |
| Casing | recessed plastic body with metal plate in front |
| Type of readable cards | EM |
| Readable frequency | 125 kHz |
| Keyboard | No |
| Installation | flush-mounted |
| Installation environment | indoor, outdoor (without protection) |
| Environmental protection rating | IP66 |
| Vandalproof protection | metal case |
| Capacity | 3,000 cards |
| Method of security backup | none |
| Methods of adding users | via master cards |
| Wiegand input bit rating | none |
| Wiegand output bit rating | none |
| Power supply | 9-24 V DC |
| Power consumption | <25 mA (idle); <100 mA (active) |
| Dimensions | 115 × 40 × 30 mm |
| Reading range | ~2 cm |
| Language of internal menu | none |
|---|---|
| LED | Yes |
| Buzzer | Yes |
| Keyboard lighting | no |
| Number of controllable doors | 1 |
| Lock output type | dry contact (relay, NO/NC/COM) |
| Lock output load capacity | 2 A |
| Inputs | push button |
| Tamper protection | no |
| Opening methods | only card |
| Opening signal length (if used in timed mode) | 1 ~ 99 seconds |
| Bistable mode | Yes |
| Access control functions | normal |
| Events that cause alarm | no alarm |
| Display | No |
| Working temperature | -25°C ~ +60°C |
| Humidity tolerance | 20% ~ 98% (non condensing) |
| Other properties | simple programming by switching the power on and off and shorting the pussh button input |
| Warranty (for legal entities) | 12 months |