Standalone card readers are high-security devices suitable for controlling almost any access point. Their major advantage is that, beyond card identification, they can independently control door locks, eliminating the need for a separate door control panel in the system. Their installation and use are extremely simple.
SK1 is an aesthetically designed, drip-proof, standalone card reader and code lock. With its vandal-proof construction and IP66 rating, it is suitable for outdoor use. It features two relays, with the second relay configurable for either lock control or doorbell mode.
Product category | A |
---|---|
Type of device | RFID reader, code-lock |
Casing | metal case |
Type of readable cards | EM |
Readable frequency | 125 kHz |
Keyboard | Yes |
PIN length | 4 - 6-digit |
Installation | surface-mounted |
Installation environment | outdoor (with rain protection) |
Environmental protection rating | IP66 |
Vandalproof protection | metal case, sabotage protection |
Capacity | 1,000 users (1st zone 100 users (2nd zone) |
Method of security backup | none |
Methods of adding users | via built-in keyboard |
Wiegand input bit rating | none |
Wiegand output bit rating | none |
Power supply | 12-28 V AC/DC |
Power consumption | 55 mA (idle); 80 mA (active) |
Dimensions | 120 × 76 × 25 mm |
Reading range | 3 ~ 6 cm |
Language of internal menu | none |
LED | Yes |
---|---|
Buzzer | Yes |
Keyboard lighting | yes (cannot be turned off) |
Number of controllable doors | 2 |
Lock output type | dry contact (relay, NO/NC/COM) |
Lock output load capacity | 3 A |
Inputs | push button, door contact |
Outputs | bell, alarm |
Tamper protection | yes (via optical sensor) |
Opening methods | only card, card and PIN, card or PIN |
Opening signal length (if used in timed mode) | 1 ~ 99 seconds |
Bistable mode | Yes |
Access control functions | normal |
Events that cause alarm | door left open, door opened forcefully, door opened by panic user, multiple failed PIN attempts, multiple failed card attempts, tamper |
Alarm timing | 1 ~ 3 minutes |
Display | No |
Working temperature | -40°C ~ +60°C |
Humidity tolerance | 10% ~ 90% |
Other properties | the second relay configurable for either lock control or doorbell mode |
Warranty (for legal entities) | 12 months |
Certificate | DOC |
Manufacturer | SECUKEY |