0036 1 406 98 08
SKU
S2-MF(V2)
Drip-proof (IP66), plastic standalone card reader - MIFARE
€38.50
Description
S2-MF(V2) - Drip-proof (IP66), plastic standalone card reader - MIFARE
Standalone card readers are high-security devices suitable for controlling almost any access point. Their major advantage is that, beyond card identification, they can independently control door locks, eliminating the need for a separate door control panel in the system. Their installation and use are extremely simple.
S2-MF is a sleek, standalone, drip-proof card reader with a plastic housing, designed for 13.56 MHz MIFARE cards. Its energy-efficient design ensures long-lasting and cost-effective operation. Master cards make adding or deleting users quick and easy. With an IP66 rating, it's suitable for outdoor use, though it is not vandal-resistant due to its plastic construction.
More Information
| Product category | A |
|---|---|
| Type of device | RFID reader |
| Casing | plastic case |
| Type of readable cards | MIFARE CLASSIC |
| Readable frequency | 13.56 MHz |
| Keyboard | No |
| Installation | surface-mounted |
| Installation environment | outdoor (with rain protection) |
| Environmental protection rating | IP66 |
| Vandalproof protection | sabotage protection |
| Capacity | 2,000 users |
| Method of security backup | none |
| Methods of adding users | via master cards, via remote control |
| Wiegand input bit rating | none |
| Wiegand output bit rating | none |
| Power supply | 12 V DC |
| Power consumption | <40 mA (idle); <160 mA (active) |
| Dimensions | 48 × 103 × 20 mm |
| Reading range | 3 ~ 10 cm |
| Language of internal menu | none |
| LED | Yes |
|---|---|
| Buzzer | Yes |
| Number of controllable doors | 1 |
| Lock output type | dry contact (relay, NO/NC/COM) |
| Lock output load capacity | 2 A (30 V DC) |
| Inputs | push button |
| Tamper protection | yes (via optical sensor) |
| Opening methods | only card |
| Opening signal length (if used in timed mode) | 1 ~ 99 seconds |
| Bistable mode | Yes |
| Access control functions | normal |
| Events that cause alarm | multiple failed card attempts, tamper |
| Alarm timing | 0 ~ 3 minutes |
| Display | No |
| Working temperature | -40°C ~ +60°C |
| Humidity tolerance | 20% ~ 98% (non condensing) |
| Other properties | it is recommended to use with credit card type cards, opposed to proxy tags |
| Warranty (for legal entities) | 12 months |
| Certificate | DOC |
| Manufacturer | SILIN |