Standalone card readers are high-security devices suitable for controlling almost any access point. Their major advantage is that, beyond card identification, they can independently control door locks, eliminating the need for a separate door control panel in the system. Their installation and use are extremely simple.
SK1 is an aesthetically designed, drip-proof, standalone card reader and code lock. With its vandal-proof construction and IP66 rating, it is suitable for outdoor use. It features two relays, with the second relay configurable for either lock control or doorbell mode.
| Product category | A |
|---|---|
| Type of device | RFID reader, code-lock |
| Casing | metal case |
| Type of readable cards | EM |
| Readable frequency | 125 kHz |
| Keyboard | Yes |
| PIN length | 4 - 6-digit |
| Installation | surface-mounted |
| Installation environment | outdoor (with rain protection) |
| Environmental protection rating | IP66 |
| Vandalproof protection | metal case, sabotage protection |
| Capacity | 1,000 users (1st zone 100 users (2nd zone) |
| Method of security backup | none |
| Methods of adding users | via built-in keyboard |
| Wiegand input bit rating | none |
| Wiegand output bit rating | none |
| Power supply | 12-28 V AC/DC |
| Power consumption | 55 mA (idle); 80 mA (active) |
| Dimensions | 120 × 76 × 25 mm |
| Reading range | 3 ~ 6 cm |
| Language of internal menu | none |
| LED | Yes |
|---|---|
| Buzzer | Yes |
| Keyboard lighting | yes (cannot be turned off) |
| Number of controllable doors | 2 |
| Lock output type | dry contact (relay, NO/NC/COM) |
| Lock output load capacity | 3 A |
| Inputs | push button, door contact |
| Outputs | bell, alarm |
| Tamper protection | yes (via optical sensor) |
| Opening methods | only card, card and PIN, card or PIN |
| Opening signal length (if used in timed mode) | 1 ~ 99 seconds |
| Bistable mode | Yes |
| Access control functions | normal |
| Events that cause alarm | door left open, door opened forcefully, door opened by panic user, multiple failed PIN attempts, multiple failed card attempts, tamper |
| Alarm timing | 1 ~ 3 minutes |
| Display | No |
| Working temperature | -40°C ~ +60°C |
| Humidity tolerance | 10% ~ 90% |
| Other properties | the second relay configurable for either lock control or doorbell mode |
| Warranty (for legal entities) | 12 months |
| Certificate | DOC |
| Manufacturer | SECUKEY |