TF5EM-W-TUYA - Waterproof (IP68), WiFi standalone biometric card reader with keypad
TF5EM-W-TUYA is a standalone fingerprint and card reader with keypad that offers an economical solution without sacrificing quality. Its IP68 rating and vandal-proof metal housing make it suitable for outdoor installation. Moreover, the mobile application developed with Tuya opens up a wide range of possibilities. The device connects to the application via WiFi, allowing users to:
• Unlock and configure it remotely;
• Assign codes remotely, including time-limited or one-time-use PINs;
• Integrate it into a smart home system;
• Log activities without any wired connections.
Users can be identified via card, code, fingerprint, or a combination of card and code. The application also allows for phone-based unlocking. The device's capacitive fingerprint reader ensures reliable biometric identification in all environments.
Controller's type | stand-alone biometric reader |
---|---|
RFID frequency | 125 kHz EM |
Door relays | 1 door 2 way (with RFID reader) |
Lock output type | relay NO / NC |
Programming method | with master cards, with master fingers, from keypad, from smartpPhone application |
Capacity | 10,000 cards/PINs, 600 fingerprints |
Software / application | TUYA |
Connectivity | Wiegand, WiFi, Tuya |
Wiegand Interface | input, output |
Wiegand bit length | 26 - 58-bit (adjustable) |
RS-485 interface | None |
Reading distance | 2 ~ 6 cm |
Event log capacity | unlimited (only in miobile app) |
Opening method(s) | PIN code, RFID card, RFID card & PIN toghether, fingerprint, mobile app |
Unlock time | 0.050 sec / 1 ~ 255 sec |
Inputs | Door Release button, RFID reader |
Outputs | Wiegand output |
Keypad? | Yes |
Keypad backlight | Switchable (Number backlight) |
PIN length | 4-6 digits |
Vandalproof? | Metal Case |
LED feedback | Yes |
Buzzer feedback | Yes |
---|---|
User Interface | LED, Voice |
Anti-passback | None |
Interlock | None |
Passage mode | None |
Multicard opening | Yes |
Guestuser | None |
Power supply | 12 - 18 V |
Type of power | DC |
Current draw | 35 mA (idle), 100 mA (active) |
Mounting | wall-mount |
Installation environment | indoor, outdoor |
Index of protection (water and dust) | IP68 |
Dimension | 135 × 48 × 24 mm |
Accessories in the package | screw set, hex key, diode/diodes (based on the number of lock relays) |
Tamper protection | none |
Environment temperature ( °C ) | -40°C ~ +60°C |
Humidity tolerance | 0 ~ 98% (non condensing) |
Warranty | 12 month |
Certificates | CE |
Manufacturer | Silin |
Product category | A |