Mini GSM module with PC connection, event log

ASC-EASYCON-GSM - Mini GSM module with PC connection and event log

The module can be used for remote control (e.g. gate control), or even as an add-on for alarm control panels. It is equipped with 2 contact-controlled inputs and an open collector output, and by using a relay, the output can be a relay output.

The device can send SMS and/or voice messages to 8 phone numbers. The sending of this notification can be triggered by a signal on one of the inputs, a remote fault, internal sabotage or even the arming/disarming of the GSM module. It is also possible to provide notifications with a separate voice message which is played when the call is received.

You can also control the output with a free call or SMS. And control by caller ID can prevent control from unauthorised telephone numbers. In this case, up to 1,000 control phone numbers can be stored in the on-board memory, but the numbers can also be stored on the SIM card. Control from any phone number without identification, providing unlimited user numbers. In addition, it is possible to control the phone by SMS, even if the settings are different.

The module can store up to 16,000 events, recording the status of inputs and outputs, power restarts, GSM network and module status information, incoming and outgoing calls and SMS messages.

The built-in Anti Jammer System (AJS) provides protection against GSM jammers. In the event of a drastic drop in GSM signal strength or a network disconnection, a separate alarm or output control can be set.

The device continuously monitors the power supply and the GSM network status, the latter can be viewed in 1-hour graphs.

Programming can be done via SMS command, computer or Android mobile phone.