0036 1 406 98 08
SKU
SBUTTON-6-wet
Wireless push button with wet contact
€23.80
Description
The SBUTTON-6-wet is a 1 channel radio transmitter receiver set consisting of a built-in receiver panel without cover (see pictures) and a fixed/portable transmitter.
The receiver is equipped with a transistor output, which can be switched to a timed or bistable output. Two members of the transceiver group are currently available. The first is this model, which has a so-called wet contact output, which controls the connected devices by a direct, NOT SEPARATED power output. The other is a dry contact output with a conventional NO/NC.
They can be used as short-range wireless control, to build a wireless doorbell, or, thanks to their quiet operation, even as a hidden attack alarm.
Downloads
More Information
| Voltage (V) | 12 V |
|---|---|
| Voltage type | DC |
| Power supply requirement | permanent |
| Stand-by current consumption (A) | 20 mA |
| Maximum current consumtion (A) | 60 mA |
| Max. operating distance | 50 m (open space) |
| Operation frequency | 433.92 MHz |
| RF code type | Hopping code |
| Number of channels | 1 |
| Memory capacity | 6 transmitters |
| Controlled output type | MOSFET OC |
| Controlled output current rating | 3 A @ 12 V DC |
| Controlled output timing type | bistable, timed |
| Controlled output timing | 1/5 sec |
| Operating modes | bistable, timed |
| Antenna type | Panel antenna |
| Tamper protection | none |
| Dimensions | 35 x 50 x 20 mm |
| Installation area | indoor |
|---|---|
| Environmental temperature | -20°C - +60°C |
| Humidity tolerance (non-condensing) | max. 85 % |
| IP rating | unclassified |
| IK rating | None |
| Gross weight | 87 gr |
| Package contents | screw set, 1 pc RF receiver, 1 pc remote control with battery |
| Warranty | 12 months |
| Certificates | CE |
| Manufacturer | SecuKey |
| Number of buttons on remote control | 1 |
| Remote control layout | Portable, Fixed installation |
| Remote control button protection | None |
| Remote control functions | Controls, Panic |
| Type of remote control battery | 1x CR2032 |
| Suggested battery replacement cycle time | 1 year |
| Remote control dimensions | 83 x 40 x 10 mm |
| Product category | A |