The YAD-200SW (PULL) is an automatic door operator with a sliding arm. The device is easy to install, and its wiring and adjustment are extremely simple. It is equipped with safety inputs, suitable for controlling a 12 V DC fail-safe electric lock, and can be connected to an uninterruptible power supply. The opening and closing speed, deceleration angle, and hold-open time can be adjusted using potentiometers.
The package includes the door operator, a remote control for setting the operating mode, and the sliding arm.
Voltage (V) | 230 V |
---|---|
Voltage type | AC |
Consumption (W) | 50 W |
Parameters of a movable door leaf | 100 kg (depends on dimension) |
Opening speed | adjustable with a potentiometer |
Closing speed | adjustable with a potentiometer |
Reclosure delay | 0~30 mp |
Maximal opening angle | 100° |
Programming | manually from controller |
Opening possibilities | controlled electrical signal, (NO - dry contact) |
Behaviour (in case of power off) | freely movable in the case of a fail-safe electric lock |
Operating modes | Always open, automatic opening, single open-close, full lock mode |
Adjustable operating mode | with the factory remote control, with a program switch |
Other functions | uninterruptable, interlock system, synchronized operation, self-learning, obstacle detection |
---|---|
Dimension of body | 540 x 95 x 82 mm |
Arm size and type | 480 mm, sliding arm |
Mounting | surface mounted, above the door |
Recommended use | in the case of inward opening doors |
Installation area | indoor |
Package contents | door operator, mounting bracket, screw set, sliding arm |
Compatible products | electric lock, access control system, IR sensor, combined sensor (IR and microwawe) |
IP rating | IP12 |
Environmental temperature | -20°C ~ +50°C |
Gross weight | 7 kg |
Warranty | 12 months |
Certificates | CE |
Product category | A |