RFID door lock - 125 kHz EM

Stand-alone office locks are perfect for hotels, lodges, and offices with their elegant, modern appearance and high-level security, but they can be installed on any indoor door. By incorporating the reader, handles, escutcheon, and lock control, they provide a compact solution anywhere.

The ODS is an office lock with a card reader capable of reading any type of EM RFID tag. Installation is extremely simple, with no need for additional wiring or software usage. The handle can be freely depressed from the outside when in the locked position; however, the door cannot be opened at this time. After swiping the authorized card, the door can be opened. Inside, pressing the handle causes the latch to retract, and pulling the handle activates the mortise lock, putting it in the locked position.

Reversing the opening direction is very simple. The handles can be easily reversed by loosening and unscrewing one cross-headed screw each. Similarly, the direction of the mortise lock can be changed by loosening and unscrewing one screw, then rotating the latch 180°.

Important! If you change the opening direction of the device, don't forget to adjust the direction of the axis locking socket as well.

The set includes the door lock, a mortise lock, and a cylinder lock with 2 keys (for emergency unlocking). The lock operates with 4 AAA batteries. The external and internal sides need to be connected with a wire.

The dorn distance: refers to the distance between the front plate and the handle axis.
The handle - key center distance: refers to the distance between the center of the handle axis and the center of the keyhole.