Cabinet lock - numbering system - 13,56 MHz - free mode

The T-0880-FREE is an RFID reader cabinet lock that can be programmed using the T-HS handheld programmer. Programming requires one fb T-MC project card and MIFARE Classic (S50) cards operating at 13.56 MHz. The lock itself receives a dedicated serial number, which is written into the memory of the RFID tag (card, key fob, wristband) used to lock it, and can be read with the T-LR wall-mounted reader. It's an optimal solution for places where both valuables need to be safeguarded and there's a high turnover of guests.

The device operates in a valuables preservation mode, meaning it can only be unlocked with the same RFID tag (card, key fob, wristband, etc.) that was used to lock it. It's crucial that the issued cards are prepared for use with the T-HS handheld programmer before deployment.

The cards to be programmed (T-MC and for users) are not included in the package and must be purchased separately.

- For a project involving N cabinets, you may need:

• 1 T-HS handheld programmer
• 1 T-MC project master card
• 1 RFID tag (MIFARE, 13.56 MHz) for numbering the cabinet locks
• 10 RFID tags (MIFARE, 13.56 MHz) for simultaneous use of 10 cabinets
• Optionally, depending on requirements, T-LR(V2) wall-mounted readers for identifying RFID tags.

- Programmed card levels: 1 Project master card - any number of Master cards - User cards prepared for use

- User cards can be used with any 13.56 MHz (S50) tags sold by our company.

- The Project master card (1 piece) must be purchased separately because without this card, the cabinet locks cannot be numbered.