The YB-1600DMD(LED)-ELEV is a mortise-mounted motorized bolt lock fpr a double feaf door with a double bolt locking mechanism. Ideal for installation in elevators or heavy-duty metal/wooden doors. Its power failure behavior is fail-secure (remains locked). It can be opened with an emergency key even in the event of a power outage. Equipped with LED indicators, as well as door (Reed) and lock status (HALL/microswitch) feedback.
The motorized bolt lock requires continuous power suppply, and to open, the electronic control system must send an opening signal through a control wire. Compared to traditional solenoid-based bolt locks, its advantage is that it consumes power only during the moments of opening and closing, with virtually zero power consumption in idle mode. The device locks only when the strike plate is properly detected (respecting the specified re-lock delay), and if the door is not opened, it will automatically re-lock after 5 seconds.
It is important to always adhere to the installation and wiring instructions. Incorrect wiring, such as controlling the lock through power interruptions, may damage the lock's electronics.
Voltage (V) | 12 - 28 V |
---|---|
Voltage type | DC |
Power supply requirement | permanent |
Maximum current consumtion (A) | 800 mA |
Stand-by current consumption (A) | 50 mA |
Power consumption (W) | 9,6 W |
Expected per year consumption (kWh) | ~ 84 kWh |
Operating modes | motorized |
Type of control | control wire (dry contact) |
Opening possibilities | controlling wire - GND shortcut, special key for elevators |
Reclosure delay | 0 / 3 / 6 / 9 s |
Automatic relocking (without actual opening) | 5 sec |
Behaviour (in case of power off) | Fail-secure |
Product family | YLI motorized bolt lock |
Low power consumption? | no |
Monitoring | lock sensor , door sensor, LED |
Type of monitoring | Reed relay, HALL sensor / Microswitch |
Lock monitoring signal type | NO/NC |
Door monitoring signal type | NO |
LED feedback | yes |
Opening direction (DIN 107) | universal |
---|---|
Field of use | elevators |
Mounting | flush mounted (hidden) |
Package contents | bolt lock, armature plate, fixing screw |
Installation area | indoor |
Preloaded door opening | yes |
Dimensions | 260 x 30 x 53 mm |
Distance between fixing holes | 240 mm |
Dorn distance | 35 mm |
Dimension of armature plate | 160 x 25 x 3 mm |
Mortise dimension | 220 x 28,5 x 50 mm |
Shape of bolt/latch | bolt (arrow shape) |
Dimension of bolt/latch | 14 x Ø15,8 mm (x2) |
IP rating | unclassified |
Environmental temperature | -10°C ~ +55°C |
Gross weight | 1 kg |
Warranty | 12 months |
Certificates | CE |
Manufacturer | YLI |
Product category | A |