SKU
YB-630B(LED)

Electric bolt lock - 12V DC - fail-secure - door status monitoring

Budapest warehouse: Limited stock
Add to Compare
€180.00
Description

The YB-630B(LED) is a flush-mounted electric bolt lock. Its behavior during power outage is fail-securee. It has a LED and door status feedback, and the auto-close time is adjustable.

The electric bolt lock requires continuous power supply, and the electronic control must provide an opening signal via the control wire for unlocking. The device only locks when the opposing side is detected, and if no opening occurs, it automatically relocks after 5 seconds. In case of emergency, os power-off it opens via built in cylinder lock.

It's important to always follow the installation and wiring instructions; incorrectly wired latch electronics, for example, controlled by power interruption, can be damaged.

WARNING! It is FORBIDDEN to install electric latches operating on the solenoid principle in escape routes. If the door is under any tension for any reason, the lock (with solenoid operating) cannot exert enough force to retract the bolt into position. As a result, the door will not open until the tension is released.

Downloads

More Information

More Information
Voltage (V) 12 V
Voltage type DC
Power supply requirement permanent
Maximum current consumtion (A) 1,27 A
Stand-by current consumption (A) 230 mA
Power consumption (W) 2,76 W
Power consumption during solenoid operation (W) 15,24 W
Expected per year consumption (kWh) ~ 0,134 kWh
Breaking point (N) 19613 N
Breaking point (kgf) 2.000 kgf
Type of control control wire (dry contact)
Opening possibilities key, controlling wire - GND shortcut
Reclosure delay 0 / 3 / 6 / 9 s
Automatic relocking (without actual opening) 5 sec
Behaviour (in case of power off) Fail-secure
Product family YLI bolt lock
Monitoring door sensor
Type of monitoring Reed relay
Door monitoring signal type NO/NC
LED feedback yes
Opening direction (DIN 107) universal
Field of use interior door, entrance doors, aluminium doors, wooden doors
Mounting flush mounted (hidden), flush mounted with bracket
Package contents bolt lock, armature plate, fixing screw
Related brackets BBK-601
Installation area indoor
Preloaded door opening no
Dimensions 270 x 73 x 30 mm
Distance between fixing holes 255 mm
Dorn distance 55 mm
Dimension of armature plate 100 x 25 x 3 mm
Mortise dimension 220 x 28,5 x 45 mm
Shape of bolt/latch bolt
Dimension of bolt/latch 16 x Ø16 mm
Compatible lock cylinder EUROPROFILE cylinder
IP rating unclassified
Gross weight 1,6 kg
Warranty 12 months
Certificates CE
Manufacturer YLI
Product category A